Class Central is learner-supported. When you buy through links on our site, we may earn an affiliate commission.

Rice University

Fundamentals of Electrical Engineering Laboratory

Rice University via Coursera

This course may be unavailable.

Overview

This course represents a real hands-on laboratory course in introductory electronics. In it, you will learn how to use the instruments every electrical engineer needs to know: the oscilloscope, function generator and multi-meter. You will use these instruments running on your computer to measure voltages from circuits you will build from actual electrical components with measurement systems provided by National Instruments, Inc. Students will be required to purchase hardware, software and electrical parts.

This laboratory uses the terminology and knowledge of electrical engineering provided in Coursera's Fundamentals of Electrical Engineering. You can take the laboratory simultaneously with this course or afterwards. Once you learn the basics found in the laboratory course, you will know how to interface electrical circuits to measurement systems, be they analog or digital. You will have the knowledge to build live circuits and get them to work. No simulations!!


This lab would not be possible without the strong involvement of our industrial partners. National Instruments makes the myDAQ interface equipment as well as the LabView and ELVISMX software system that emulates measurement instruments. DigiKey Corporation gathered the diverse collection of electrical and electronics parts into a course-specific parts kit. Mathworks is supplying the Matlab software environment for this course without charge for the course's duration.


Syllabus

Lab Zero: Ordering the laboratory kit, opening the box and installing the software. Most electrical engineering systems combine hardware and software systems, and this kit follows that approach. Instruments are implemented in software to run on your computer while the circuits and software perform information processing. Because of delivery of the parts take time, this "lab" lasts for several weeks even though it is quite simple.

Lab One: Simple DC Circuits. Using a DMM (Digital Multi-Meter) to measure voltage, current, and resistance; an oscilloscope to display time-varying voltages; a power supply to produce constant (DC) voltages; and a function generator to produce time varying (AC) voltages.

Lab Two: AC Measurements. Characterization and measurement of waveforms using an oscilloscope. Grounding issues. Electro-acoustics—conversion of sound to voltage and back—and opto-electronics—conversion of light to voltage and back.

Lab Three: Signal Processing I: Amplifiers. Using the op-amp in various modes for creating amplifiers.

Lab Four: Signal Processing II: Filters. Building passive and active filters and measuring their transfer functions.

Lab Five: Signals and Systems I. Time-domain and frequency-domain characterization of signals, especially speech.

Lab Six: Signals and Systems II. A/D  and D/A conversion. 

Lab Seven: Digital Signal Processing I. Implementing digital filters.

Lab Eight: Digital Signal Processing II. Advanced digital filtering. Generating signals digitally. "Fancy" signal processing: speech scramblers, digital music.

Lab Nine: Final Project. A combined optical communication/pulse monitor system.

Taught by

Don Johnson and

Reviews

4.0 rating, based on 2 Class Central reviews

Start your review of Fundamentals of Electrical Engineering Laboratory

  • Anonymous
    i am an electrical engineering student in the university of buea Cameroon.your lectures give me one i need to become a good engineer who can quickly diagnose electrical fault.
  • Profile image for Taru Savner
    Taru Savner

Never Stop Learning.

Get personalized course recommendations, track subjects and courses with reminders, and more.

Someone learning on their laptop while sitting on the floor.